| Model |
| Model | RNX-EasyN4 |
| Brand | Rosewill |
| Spec |
| Humidity | 10 to 95%, Non-Condensing |
| Temperature | 0 to 45°C |
| Wireless Adapter included | No |
| VPN support | IPSec, L2TP, and PPTP VPN pass-through |
| Interface | Ethernet Port |
| Receiver Sensitivity | IEEE802.11n(2RX)
MCS0/8 at -91dBm
MCS7/15 at -74dBm
IEEE802.11g (2RX)
6Mbps at -92dBm
54Mbps at -75dBm
IEEE802.11b (1RX)
1Mbps at -93dBm
11Mbps at -91dBm |
| Channels | 11 CH (US, Canada), 13 CH (ETSI), 14 CH (Japan) |
| Antenna | Fixed 2 dBi Antenna x2 |
| Frequency Band | 2.4GHz - 2.484GHz |
| Modulation | OFDM: BPSK, QPSK, 16-QAM, 64-QAM
DBPSK, DQPSK, CCK |
| Data Rates | up to 300Mbps |
| LEDs | Power Status
WAN (Internet connection)
10/100Mbps LAN1~LAN4
WLAN(Wireless connection) |
| Ports | 1 x 10/100M WAN; 4 x 10/100M LAN |
| WPA/WPA2 | WPA/ WPA2 |
| Device Management | Web-based configuration (HTTP) |
| Standards | IEEE 802.11b/g/n (ver2.0) |
| Features |
| Features | RNX-EasyN4 is a 2T2R Wireless Single chip 11N Broadband Router that delivers up to 12x faster speeds and 4x extended coverage than 802.11g devices. RNX-EASYN4 supports home network with superior throughput and performance and unparalleled wireless range. With easy to use on the WPS function, it helps users to connect to wireless device with just one push button. RNX-EASYN4 supports home network with superior throughput and performance and unparalleled wireless range. With easy to use on the WPS function, it helps users to connect to wireless device with just one push button. There's also a built-in 4-port full-duplex 10/100 Fast Switch to connect your wired-Ethernet devices together. The Router function ties it all together and lets your whole network shares a high-speed cable or DSL Internet connection.
x4 built-in high performance 10/100Mbps Switch Ports (Auto-Crossover)
x2 high gain Omni directional 2 dBi fixed antenna connecting for the best wireless signal.
Quick hardware button for WPS setup to enhance the security.
Easy setup with Wi-Fi Protected Setup (WPS).
802.11b/g/n 2.0 provide further coverage, less dead spot and higher throughput.
MIMO technology throughput up to 300 Mbps for Ralink 2T2R solution.
Supports MIMO technology with 2 external 2 dBi SMA Antennas
Support Cisco CCS V1.0, V2.0 and V3.0 compliant WPS.
Wireless Multimedia Enhancements Quality of Service support (QoS) / enhanced power saving for Dynamic Networking
Important notice:
1. You must reboot both the router and your house modem (from your ISP) after the first time you setup the router. After that, your modem can detect the new setting and works correctly.
2. Older PC/NB may have problems connecting (slow or fail to open the network) with RNX-N4/N4PS. This is due to a driver issue of your wireless client trying to connect to new N router. Please update the wireless driver of your PC/NB to solve this issue. |
| Packaging |
| Package Contents | RNX-EasyN4 802.11n SOHO Router
1 12V/1A Switching Power Adapter
2 x 2dBi 2.4GHz Dipole Antennas (fixed with router)
1 x QIG
1 x CD (Included User's Manual) |