FSP Group (Fortron Source) ATX300-PA ATX 12V (v2.2) 300W Power Supply 110 - 127/220 - 240V UL, CSA, TUV, NEMKO, CB & FCC
| Model | | Brand | FSP Group (Fortron Source) | | Model | ATX300-PA | | Spec | | Type | ATX 12V (v2.2) | | Maximum Power | 300W | | Fans | 1 | | PFC | No | | Main Connector | 20+4Pin | | Dual +12V | Yes | | PCI-E Connectors | No | | SLI Support | No | | Modular Cabling Support | No | | Power Good Signal | 100-500ms | | Hold-up Time | 12.0mS minimum at 115V/60Hz or 230V/50Hz (Full Load) | | Efficiency | > 70% | | Over Voltage Protection | +3.3V (4.6V max.), +5V (6.5V max.), 12V1 (15.5V max.), 12V2 (15.5V max.) | | Overload Protection | Yes | | Input Voltage | 110 - 127/220 - 240V | | Input Frequency Range | 50/60 Hz | | Input Current | 7A @ 115V, 4A @ 230V | | Output | +3.3V@20A, +5V@20A, +12V1@16A, +12V2@16A, -12V@0.8A, +5VSB@2A | | MTBF | 100K hours at 25°C | | Approvals | UL, CSA, TUV, NEMKO, CB & FCC | | Features | | Connectors | 1 x Main connector (20+4 pin)
1 x 12V (P4)
4 x peripheral
1 x SATA
1 x Floppy | | Features | Remote ON/OFF Control:
The power supply shall accept a logic open collector level which will disable / enable all output voltage (excluding +5V standby).
Over-current protection: +3.3V (66.0A max.), +5V (50.0A max.), 12V1 (27.0A max.), 12V2 (27.0A max.)
Temperature range: operating 0°C~50°C, storage -20°C~65°C
Humidity: 90~95% RH
Dielectric strength: primary to Frame Ground 1800 VAC for 1 second, primary to secondary 1800 VAC for 1 second | | Manufacturer Warranty | | Parts | 1 year limited | | Labor | 1 year |
|